Briz Family Formula toy Build!!!!!

Well fathers day my Dad, Gramps, and my bro came over helped me strip her down and paint the frame and chassis. 12 cans later (bass boat sparkle black). And 2 cans of clear coat. I fabbed up the rear storage area with the shox through the mini bed.

[img][/img]

[img][/img]

[img][/img]

Fuel pump mounted.
[img][/img]

DAMN MAN LOOKS GOOD

We need a full rig shot now that it's painted!

Very Nice work Chris.

Not to much further. We should start planning the first trip.

lil-bronc wrote:Very Nice work Chris.


Not to much further. We should start planning the first trip.

WERD

Got some more work done over the weekend.

Side panels are painted.
[img][/img]

[img][/img]

Brake lines and fuel lines are completed but I haven't checked for leaks yet
[img][/img]

Dash panel and line lock.
[img][/img]

fire wall is started and puter is mounted.
[img][/img]

She looks pretty mean.
[img][/img]

wow dude that thing looks BOSS !!! GREAT JOB!!!!

looks awesome man

nice work dude!

I got the exhaust done tonight. Pretty much all that is left is wiring. I am still waiting on my 12voltguy panel. It has been 6 weeks since I ordered it. [img][/img]

This things coming together nicely. Keep up the good work.

The 12volt guy panel came in today. (SO SICK) Pete is coming over saturday to see if we can get her driveable. I got the car seats all positioned.
OH yeh
[img][/img]
Brody is ready to wheel
[img][/img]

[img][/img]

I snapped a quickie of gotmilf her self.[img][/img]

damn man, nice job. looks great. how much was the 12vguy panel if you dont mind me asking?

195.00 shipped. He gave me a discount because it's an ftoy. He also hooked me up with his winch install kit. The panel is normally like 230.00. 12voltguy.com

Jealous....

Seems like I go two steps forward then one step backwards.

Pete and I worked on wiring all day saturday with very bad results. We ended up with smoke coming out of the computer. We spent an hour or so trying to trouble shoot with no success. Hopefully the puter isn't fryed. I am not sure what to do now.

Dang.... I hope you get it figured out and it's just something simple. Good luck!

u should be able to code it out it would be just like an obd 2

BIG BLING wrote:u should be able to code it out it would be just like an obd 2

What with indian code. I have yet see something have smoke come out of it and still works. I hope it does for Chris's sake, but the odds are not good.

I am just going to go ahead and get a new computer. There is no way the old 1 is still good.

I would see if the old pcm set off a code if possible. maybe he can find out what shorted out the pcm before putting another one in it. or he could just keep changing them and following the smoke signals.

hey if u need w/d 's or pcm ecm testing or circut testing or sensor testing let me know i got the resources.

IT IS ALIVE AND RUNNING GREAT!!!!! Pete came over this afternoon to trouble shoot the problem. We opened up the computer to check the damage. We found some burn marks on 1 of the resistors. Pete tested the resistor and found it to be ok then we followed the circuit board to which prong on the computer shorted out. Located it on the print and found we had the engine check light going straight to the starter relay. OOHPS. Cut the wire double checked everything and started her right up with no hesitation. It idled very high and was leaking fuel from 1 of the fittings. The throttle cable was way to tight and I had put a wrong hose clamp on the high pressure line. We then took her out for a test drive. It runs great and feels way lighter than the lead 4runner. I have a small coolant leak from the water temp probe but I should beable to fix it farly easy. Now I just need to finish up the wiring and double check everything but its ready for fun. Thanks to Pete for all of your help buddy. I couldn't have done it with out you.

That's awesome. Good job guys. Can't wait to go wheelin with ya.