buggy build up

dont really have pics of the build step by step so heres random pics thought the never ending project

remounting rear shocks
before

after

new tube work for doors
before

after



any comments? wacha think!

Nice!! What type of bender are you using? I had a Model-3 but I never got it planted, so I never used it. I'm figuring on getting a acetalin setup and a Harbor Freight kinker. I've seen t sand rails built that way and the bends looked OK except for a small amount of wrinkling on the inner parts of the bends. Nothing real noticable.

elec over hydro jd2 model 4 with bend tech pro
still tryn to figure out the part assembly section

sweet buggy!! have the specs?

gm 350/edelbrock tpi intake/howell ecm and harness/th 350/np 205 twin sticked/d44 front/4.56 true trac/warn shafts/ctm's/full hydro hi steer/hp 60 rear 4.56 spool/stock inners/cryod outers/drive flanges/full hydro hi steer/
front & rear mm 2000 axel winches/hf 8000 recovery winch/fox air 2.5" 18"
travel 8" compression 10" droop f/r/ 1 5/8.120 wall chassis
wish bone linked/ 39.5x13.5x15 irocks f/r / 32" clearance to t case/
here's the killer 132" wb built for duel purpose crawl/baja but suspension geometry wont allow over 30 mph for now!!!!!!!!!! i'll be fixn that problem

heck of a wheelbase!!! cool rig!

started fixing all the crrrraaaapppp i broke at moonrocks
the front d44
the ring & pinion had sheared a few teeth
the clutches were gone in the power lock as well as the two cross pins
were broke in half
so new gears $145
clutch kit $55
two cross pins $30 ea.

so before mcr
put the front axle back together
weld up the housing (d44)
replace the ball joints left rear (d60)
install new inner axle w/ new seals and new u joint
install my molly stubs both sides
fab up new mounts for my clutch master and slave from my dodge (in the buggy)
install new stereo and changer

RIGHT ON MAN GET IT!!!!!

i believe you meant to say GET ON IT. or you will be riding passenger to your wife

sami girl wrote:i believe you meant to say GET ON IT. or you will be riding passenger to your wife

How is it coming Rob?

d44 housing is all welded up
gears installed
d44 is complete
taking the twist out of the chassis
d60 getting a stock inner cut (welder boy)
install new seals get rid of the the two piece ford seals
and put chevy seals in it
changing the stubs
need to rewrap the front winch
fix elec to rear winch
charging the batts
check all fluids
check all bolts