Blingn's buggy

Came with winch, 529's locked,38's 20r
My new buggy needs
hysteer
chevy's rear springs
ruf
gear the case
2 38's the other 2 are good plus I need a spare
make the rear floor and storage unit
fix the rear seat
seatbelts
and get the reg done.

link is for my ref thx

http://www.pirate4x4.com/forum/showthread.php?t=896379

I started the new paint job last night. I am going Monster blue cage with black . Pics will post tonight.

Beck got as close as she could to the color of this with the stickers that monster sends you.

I need to clean these up a bit.

looks better, now it needs a hood and some skins

sierra is going to paint the floor and the top plates this weekend. and I am going to go shop for some skins.

push pull is coming off this weekend. Sierra painted all the black parts on the rig. She did a great job.

right on matt, have you wheeled it yet?

I was thinking of wheelin at the halloween moonrocks party, but that might be pushing it though and I want to do this build right. So I think I am going to wait and do like a nov or dec fordyce run are you interested in going on the maiden voyage?

BIG BLING wrote:I was thinking of wheelin at the halloween moonrocks party, but that might be pushing it though and I want to do this build right. So I think I am going to wait and do like a nov or dec fordyce run are you interested in going on the maiden voyage?

sure by december there will probably be snow on the trail

put the snow boards on the back of them and do some trail boarding.

i took the pump off last night and taking off arms, and rods tonight. Going to prep the frame for welding and drilling out for the box.

So I am trying to wire up the winch and looking for a w/d to make it run of a momentary switch. I do not want to use the the winch controller cause I want to control it from the cab.

tested the solenoids last night and went off the w/d I got from rockbrawlers board the winch is good to go. I have to wire in the toggle but I got the motor to work with the wiring I want.

Should get some stuff done on the buggy this weekend since we canceled moonrocks trip. I got the arms coming in this weekend and the steering box kit too. Wow builds go slow with no money

arms and all steering are going to be the same color as the tube. The steering box, axles and frame are going to be the same color black as the dash and floor panels on the buggy. pics soon to come.

I got the arms painted and installed. I got the shafts painted and one on. I am marking up the box now where to drill the frame and make sure it is forward enough and tilted is always fun.

so where's the pics?

(FOR MY REFERENCE)

For rock crawling, lower transfer case gears give you the control you need to keep your truck on track. Trail-Gear offers an affordable 4.70:1 gear kit for your gear driven Toyota transfer case. Trail-Creeper T-Case gears are available in 21 and 23 spline configurations. Kits include replacement gears, gaskets and seals. Disassembly and modification of transfer case is required for installation. Input gears are precision ground & micro-polished to guarantee the removal of all surface imperfections in the forging.

Trail-Creeper gears fit Toyota 4WD Pickup's and 4Runners from 1979-1995 with gear drive style transfer cases. Gear sets reduce the stock low range from 2.28 to 4.70, nearly twice the the reduction of the stock gears. High range is not affected and remains 1 to 1. Each gear set carries a full lifetime guarantee. If your gears ever fail to function properly, simply return them to us for replacement.

V6 applications require the transfer case be replaced with a 4Cyl gear drive unit and V6 Adapter plate. Speedo cable, floorboard, drive shaft, and crossmember changes may also be required.

Why buy Trail-Gear 4.70 Gears?

* High Quality Materials
* Precision fitting spline fit for long life
* OEM Gasket Set
* Lifetime Warranty

Available options:

* Trail-Creeper T-Case Gears, 21-Spline, $349, 105000-1-K
* Trail-Creeper T-Case Gears, 23-Spline, $349, 105001-1-K

any new pics of what it looks like now matt?

Well I got to work on it for about 5 hours sunday and got into a bind. Bind = smoked my grinder. Got one from a buddy today so I should be out there tongiht and Ill get a pic of the progress.

still no pics im slackin in that department. I got the rears up front done and hysteer in. Got the dash torn apart to wire up the winch and lights.