Project RAIDER X
+15
Wermz
Red Leader
fortysixandtwo
lil-bronc
snowshoebrue
MiniSimp
Just2Much19
cdgvw1
Jay D
Blackdog
Duffil
fordh8r
oldyellercj
skipnrocks
BIG BLING
19 posters
Page 16 of 17
Page 16 of 17 • 1 ... 9 ... 15, 16, 17
Re: Project RAIDER X
noice.. Excellent job guys..
cdgvw1- BIG TIME MONKEY
-
Number of posts : 598
Age : 48
Location : Rancho Cordova, Ca.
Job/hobbies : Editor, wheelin, Air Cooled VW's, RC truck's, buildin shtuff....
Rig : 77 K5, 1 tons, 4.56:1, locked rear, 400/465/203/205 (triple sticked & want it on 42's)
Registration date : 2008-01-18
Re: Project RAIDER X
hey I read your post and look at pritty pics sick springs
lots of hard work. I bet your still glad you got your toyota and not the orgnail jeepers cripers unibody. when you weld up that rear frame mount to spring.. wow you really got to get some sliders for you doors now you going all out. and still no cage. or sliders.
I know its only time before their on but just what to save what is left of a soild cab. before you end up like a turtul on his back. just thinking of your own saftey. and passengers.
c u later
lots of hard work. I bet your still glad you got your toyota and not the orgnail jeepers cripers unibody. when you weld up that rear frame mount to spring.. wow you really got to get some sliders for you doors now you going all out. and still no cage. or sliders.
I know its only time before their on but just what to save what is left of a soild cab. before you end up like a turtul on his back. just thinking of your own saftey. and passengers.
c u later
jman-mopar- Grease Monkey
-
Number of posts : 103
Age : 45
Location : Bay area, Californa
Job/hobbies : auto parts sales
Rig : a challeng oh I mean a challenger haha
Registration date : 2007-12-20
Re: Project RAIDER X
JERM did you see the pics of your niece driving the truck?
BIG BLING- KING KONG
-
Number of posts : 1962
Age : 48
Location : S SAC
Job/hobbies : AUTO RESEARCH TECH/ wheelin and building junk
Registration date : 2007-12-19
Re: Project RAIDER X
This weekend we should be putting the axle more forward and putting on new shock mounts and new shocks. The rear shocks will also be on and the whole rig will have a longer wheelbase. I normally do a shake down run before a huge get together, but Mcr will be my shakedown run for the new suspension and wheelbase set up.
BIG BLING- KING KONG
-
Number of posts : 1962
Age : 48
Location : S SAC
Job/hobbies : AUTO RESEARCH TECH/ wheelin and building junk
Registration date : 2007-12-19
Re: Project RAIDER X
I brought the truck over to choppermans house and we got some major work done on it. He welded up the shock mounts and I changed the alternator. We both tackled the motor mounts, that fell out when we lifted the motor. We got the tow rig fixed that broke down on the way to his house. got the d max 60 in and the steering on. We stayed up till 4 am on sunday morning and woke up at 8 something am and got back to working. Chopperman figured out why the t case was leaking and he built me a driveline too.
BIG BLING- KING KONG
-
Number of posts : 1962
Age : 48
Location : S SAC
Job/hobbies : AUTO RESEARCH TECH/ wheelin and building junk
Registration date : 2007-12-19
Re: Project RAIDER X
New mcr list.
Fix the t case leak (put bolts in that are missing, and index the rear output shaft nut)
Fix the front driveline
lights
fix wiring
Fix the t case leak (put bolts in that are missing, and index the rear output shaft nut)
Fix the front driveline
lights
fix wiring
BIG BLING- KING KONG
-
Number of posts : 1962
Age : 48
Location : S SAC
Job/hobbies : AUTO RESEARCH TECH/ wheelin and building junk
Registration date : 2007-12-19
BIG BLING- KING KONG
-
Number of posts : 1962
Age : 48
Location : S SAC
Job/hobbies : AUTO RESEARCH TECH/ wheelin and building junk
Registration date : 2007-12-19
Re: Project RAIDER X
Noice.. Ready to get your wheel on??
cdgvw1- BIG TIME MONKEY
-
Number of posts : 598
Age : 48
Location : Rancho Cordova, Ca.
Job/hobbies : Editor, wheelin, Air Cooled VW's, RC truck's, buildin shtuff....
Rig : 77 K5, 1 tons, 4.56:1, locked rear, 400/465/203/205 (triple sticked & want it on 42's)
Registration date : 2008-01-18
Re: Project RAIDER X
Took her on a shake down run it had great flex. everything is dialed in. I still have a noise in the front end that I hope to find before mcr, but the rest is great.
BIG BLING- KING KONG
-
Number of posts : 1962
Age : 48
Location : S SAC
Job/hobbies : AUTO RESEARCH TECH/ wheelin and building junk
Registration date : 2007-12-19
Re: Project RAIDER X
Looked good to me!
Just2Much19- Gearhead Monkey
-
Number of posts : 329
Age : 43
Location : Roseville
Job/hobbies : Insurance
Registration date : 2007-12-20
BIG BLING- KING KONG
-
Number of posts : 1962
Age : 48
Location : S SAC
Job/hobbies : AUTO RESEARCH TECH/ wheelin and building junk
Registration date : 2007-12-19
Re: Project RAIDER X
Just2Much19 wrote:Looked good to me!
dude ur rig is looking crazy cool man good job
BIG BLING- KING KONG
-
Number of posts : 1962
Age : 48
Location : S SAC
Job/hobbies : AUTO RESEARCH TECH/ wheelin and building junk
Registration date : 2007-12-19
Re: Project RAIDER X
ok so got the front end noise figured out. The d line was loose and the u bolt springs were loose. Still took the tires off and checked the spacers. also took of the bump stops and looked at the center pin and all good. tighten everything up, took off the fenders so i do not hit the tires under flex and the rock lights will show since they would not b4 with the fenders crunched in. FFC will do the rock lights tomorrow, Ill clean up the wiring for the arb, and load the new tool bags we got for the truck and we are good to go. I will not have the truss on for this trip (ran out of time). The new shock mounts are not in yet either because the rear springs are not on the front yet.
BIG BLING- KING KONG
-
Number of posts : 1962
Age : 48
Location : S SAC
Job/hobbies : AUTO RESEARCH TECH/ wheelin and building junk
Registration date : 2007-12-19
Re: Project RAIDER X
Oh, I tested that massive horn that has been under the truck for ages - and IT WORKS!!! HAHAHAHHAHAHAHAAAA. BEWARE! I will be hooking this up if I can find a spare switch... muuhahahahahahahaaa
Guest- Guest
Re: Project RAIDER X
TRUCK IS DONE LETS GO!!!
BIG BLING- KING KONG
-
Number of posts : 1962
Age : 48
Location : S SAC
Job/hobbies : AUTO RESEARCH TECH/ wheelin and building junk
Registration date : 2007-12-19
Re: Project RAIDER X
We got to follow MIke Hendrix coming out of Mcr. I got to talk to him and he had some good advice. http://www.hendrixmotorsports.com/index.html
BIG BLING- KING KONG
-
Number of posts : 1962
Age : 48
Location : S SAC
Job/hobbies : AUTO RESEARCH TECH/ wheelin and building junk
Registration date : 2007-12-19
Re: Project RAIDER X
Sickkkk rig that's fo sho. I got some vid/pics of him going up Big Sluice and coming down the other side.
Guest- Guest
Re: Project RAIDER X
well it survived mcr but now time for some fixes.
drive line:
clutch:
t case leak:
transmission mount:
drive line:
clutch:
t case leak:
transmission mount:
BIG BLING- KING KONG
-
Number of posts : 1962
Age : 48
Location : S SAC
Job/hobbies : AUTO RESEARCH TECH/ wheelin and building junk
Registration date : 2007-12-19
Re: Project RAIDER X
are you taking your rig to moonrocks?
snowshoebrue- Gearhead Monkey
-
Number of posts : 344
Age : 44
Location : modesto
Job/hobbies : electrician
Rig : 2003 tacoma truggy
Registration date : 2007-12-20
Re: Project RAIDER X
going to try to I need to make a d line bad
BIG BLING- KING KONG
-
Number of posts : 1962
Age : 48
Location : S SAC
Job/hobbies : AUTO RESEARCH TECH/ wheelin and building junk
Registration date : 2007-12-19
Re: Project RAIDER X
BIG BLING wrote:well it survived mcr but now time for some fixes.
drive line:
clutch:
t case leak:
transmission mount:
what wrong with the t-case ?
my guess is worn gaskets and or silicone due to rubbage fo=rom the missing bolts ?
Chopperman- Gearhead Monkey
- Number of posts : 364
Registration date : 2007-12-29
Re: Project RAIDER X
i beat the hell out of it on soup bowl and hit it against the rocks about 1 million times.
BIG BLING- KING KONG
-
Number of posts : 1962
Age : 48
Location : S SAC
Job/hobbies : AUTO RESEARCH TECH/ wheelin and building junk
Registration date : 2007-12-19
Re: Project RAIDER X
BIG BLING wrote:i beat the hell out of it on soup bowl and hit it against the rocks about 1 million times.
flatbelly BRO
Chopperman- Gearhead Monkey
- Number of posts : 364
Registration date : 2007-12-29
Re: Project RAIDER X
thinking about pane or efi got some pics im ordering from kyle to show the sick flex this thing is finally getting
BIG BLING- KING KONG
-
Number of posts : 1962
Age : 48
Location : S SAC
Job/hobbies : AUTO RESEARCH TECH/ wheelin and building junk
Registration date : 2007-12-19
Re: Project RAIDER X
well this truck has been wheeled hard all summer. THe first winter wheelin trip and she is done for a while.
Broke:
Radio
steering box bolts
t case mount or motor mount
front end of truck is caved in
side skirt in front is torn
front headlights are gone
all rock lights are broke are gone except one
bed fell off
broke 6 wheel studs off
3 broke beads
1 ruined tire
1 broke rim
not to mention my trailer tire fell off and rolled away. Unable to be found again.
Broke:
Radio
steering box bolts
t case mount or motor mount
front end of truck is caved in
side skirt in front is torn
front headlights are gone
all rock lights are broke are gone except one
bed fell off
broke 6 wheel studs off
3 broke beads
1 ruined tire
1 broke rim
not to mention my trailer tire fell off and rolled away. Unable to be found again.
BIG BLING- KING KONG
-
Number of posts : 1962
Age : 48
Location : S SAC
Job/hobbies : AUTO RESEARCH TECH/ wheelin and building junk
Registration date : 2007-12-19
Page 16 of 17 • 1 ... 9 ... 15, 16, 17
Similar topics
» Project: Everything swap 88' 4runner
» what would you name a project with??
» Project CJ 1 Ton
» Here is my new project
» project BIG BLING for now
» what would you name a project with??
» Project CJ 1 Ton
» Here is my new project
» project BIG BLING for now
Page 16 of 17
Permissions in this forum:
You cannot reply to topics in this forum
|
|