How to Build a Square Driveshaft

My Version: http://www.ehow.com/how_4475628_build-square-driveshaft.html

one thing that I might be able to add. That I didn't see on there that chopperman taught me is that on the ends of the driveline you do not have to cut were the flange is at. If you take a grinder and knock off the original weld it will come apart from the oe driveline. this way the flange end will stay straighter and you dont have to worry about a bad cut.

like on step 4 and 11 you can grind down the oe welds and knock off the flange

Thanks! I'll add that.

Nice write up it worked great for me.

Jay D wrote:Nice write up it worked great for me.

BIG BLING wrote:

Jay D wrote:Nice write up it worked great for me.

I will get a pic of it on the truck in action

this works great thanks mini