Rockcrawlin, Muddin, and Wrenchin.

YOTA TRANSMISSION

Post new topic   Reply to topic

GreaseMonkey4x4 :: Tech Discussions :: Yota Tech

View previous topic View next topic Go down

YOTA TRANSMISSION

Post by BIG BLING on Sun Mar 09, 2008 11:15 pm

Does a 1st gen yota trans bolt up to a 4.0 engine? what is the name of a first gen trans, g54?

_________________
Thanks to all that helped on MCR

BIG BLING
KING KONG
KING KONG

Male
Number of posts: 1634
Age: 33
Location: S SAC
Job/hobbies: AUTO RESEARCH TECH/ wheelin and building junk
Registration date: 2007-12-20

View user profile

Back to top Go down

Re: YOTA TRANSMISSION

Post by Duffil on Mon Mar 10, 2008 2:46 pm

first gen trans would be an L45, L50, L52 or if it's a 4spd, and L43. I wouldn't put any of them behind a 4.0, it will blow apart...I don't think any toy trannies bolt to the 4.0 directly...you can take an AX15/R150F and swap the extension housing and tailshaft though...on an AX5/G54 also.

Honestly, for what you want to do, get an AX15/R150F (the 3.slo trans)...it will hold up the best against the 4.0.

_________________
never underestimate the predictability of stupidity

I have realized that I am 24 at a time when the rest of the world is 17 and 40

Duffil
Grease Monkey
Grease Monkey

Male
Number of posts: 65
Age: 26
Location: in the gutter
Registration date: 2008-02-08

View user profile

Back to top Go down

View previous topic View next topic Back to top

Post new topic   Reply to topic

GreaseMonkey4x4 :: Tech Discussions :: Yota Tech

Permissions of this forum:
You cannot reply to topics in this forum