MiniSimp's 1985 Toyota

1985 & 1987 Frankenstein 22RE
1983 Front Axle
1986 Power Steering Box
1986 Rear Axle
106" Wheelbase
2.28 Crawler Box with stock shifter
2.28 Rear Transfer Case
48" High-Lift Jack With Mounts
All Pro Offroad Interior Roll Cage
Ammo Can 7"x12"x7" box for Poo
Ammo Can 7"x16"x18" box (2X)
Aussie Locked 4.10:1 Front
Aussie Locked 4.10:1 Rear
Bucket Seats (stock)
Chevy Rear Springs (Chevy main leaf, Chevy 3rd leaf, Superstiff 6" 2nd leaf, Chevy 5th leaf, Superstiff 3rd leaf, Chevy overload cut down 8" in front of perches, flush with rear of perches)
Front Range Offroad Steering Frame Brace
Front Range Offroad Transfercase Center Section
Front Range Offroad Twinstick Shifter
Home Built Chevy Spring Hangers
Home Built Driveshafts (front & rear)
Home Built Flat Bed
Home Built Gas Filler Hose Mount
Home Built Mud Flaps
Home Built Rear Pivoting Spring Perches
Home Built Rock Sliders
Home Built Shift Knobs
Home Built Shock Towers (front & rear)
Home Built Skid Plate
Home Built Video Camera Mount
Interco Tire Superswamper IROK 36x13.50x15R
Jobox Tool Box
Magellan Meridian Color GPS WAAS Compatibility
Marlin Crawler 1.5" Wheel Spacers (Front & Rear)
Marlin Crawler 26" Brake Line 3 piece kit
Marlin Crawler Drag Link
Marlin Crawler Low Profile Drain Plugs
Marlin Crawler MC08-R10 Clocked Adapter
Marlin Crawler Rear Shackles mounted through the frame
Marlin Crawler Rebuilt Knuckles
Marlin Crawler Seal kit (rear axle)
Marlin Crawler Speedometer Extension
Marlin Crawler Steering Arms
Marlin Crawler Tie Rod
Marlin Crawler Transfer Case Rebuilt
Marlin Crawler Tube Doors
Marlin Crawler U-Bolt Flip Kit (Front)
Milemarker PE8000 Winch
OTT Industries Flat Pitman Arm
Paint - Hammered Black Spray Can
Procomp ES9000 14" Travel Shocks (rears mounted at 50 degrees [64% effective])
Procomp ES2000 Steering Stabilizer
Sliding Tinted Rear Window with ghey purple tint
Thales Navigation Swivel GPS Mount
Toyota 1985 Rear Springs Up Front (4 Leaf)
Unleaded Gas
W56 5 Speed Manual
Wheels 15x8"x2"BS


Failed parts so far:

Engine (damaged at time of purchase)
Battery Clamp (Hull Creek Trails)
1st Design Pivot Blocks (Rubicon Trail)
Stock Rear Driveshaft (Niagara Rim Trail)
Alternator (Robbs Resort)
Fuel Pump (At Home)
Transfer Case Crossmember (Niagara Rim Trail)
DSR Shock (Hollister Hills)
DSR Shock (Niagara Rim Trail)
Drivers Side Birfield (Carnegie - Rock Pile)
Drivers Side Inner (Carnegie - Rock Pile)

Sounds like we need a nickname for Carnegie......like "Carnage-y"......

fordh8r wrote:Sounds like we need a nickname for Carnegie......like "Carnage-y"......

Nah, you just gotta know how to wheel it


I used to live 4 miles up from Carnegie

FFC wrote:

fordh8r wrote:Sounds like we need a nickname for Carnegie......like "Carnage-y"......

Nah, you just gotta know how to wheel it


I used to live 4 miles up from Carnegie

He's a noob, give him a break... You don't wanna scare him off now do ya?

Chit chat!

You know you'll be going on that run again...right...

So I took off the spare tire mount in favor of strapping it down to the bed now that I have the room.

What do you guys think?

Also, not sure what to do with the cans yet, yes I need to carry them.

I like the new location. I dont know where to put the cans will they fit in the tool box????

BIG BLING wrote:I like the new location. I dont know where to put the cans will they fit in the tool box????

X2. I like the tires sitting flat on trucks!!

Your truck is sweet man. Always liked it. I like the new tire location too as long as you can still find spots for what it replaces

fortysixandtwo wrote:Your truck is sweet man. Always liked it. I like the new tire location too as long as you can still find spots for what it replaces

Cleaned up the contents of my tool box, so everything that was on the bed is now in there.

BIG BLING wrote:I like the new location. I dont know where to put the cans will they fit in the tool box????

Ewww could you imagin if there was a leak, and then you break down and the poobox contents are all over everything?/? I vote keepin them on the bed somewhere!! Do you have any pixs of it all put together?

skipnrocks wrote:

BIG BLING wrote:I like the new location. I dont know where to put the cans will they fit in the tool box????

Ewww could you imagin if there was a leak, and then you break down and the poobox contents are all over everything?/? I vote keepin them on the bed somewhere!! Do you have any pixs of it all put together?

Those aren't the poo cans, that can is mounted behind the DS cab on the rock rail.