87 Runner
Page 1 of 2 • Share •
Page 1 of 2 • 1, 2 
87 Runner
My Runner has an SAS & 63's in the rear that fordh8r & I did New Years eve weekend since we had nothing better to do
Currently it has a Sky front hanger moved forward 1" & boomerang shackles with Alcan 5.5" springs that are 1.5" longer than stock, Marlin u-bolt flip kit, Sky x-over steering, Marlin 14" shock hoops Rancho 9000's in the front. The rear has 63" Chevy's with Chevy u-bolts as a u-bolt flip kit, a Chevy lowering shackle flipped as a lift shackle attached to a drop shackle, custom rear shock mounts with Rancho 9000's. I have a 2" block to level it out since the front was higher than expected. Front axle has a Quik Loc in the front w/open rear & 5.29 Yukon gears front & rear. 2" body lift to help clean Marlin sliders. Custom rear bumper with trailer hitch & D-rings. Square tube front d-line, 12,000lb Warn winch mounted in the front. Bikini top for the summer time & a cheesy thrown together hitch mounted spare tire carrier.
Coming soon & not in order
1. Finish front winch mount bumper
2. Rears up front & lower the height by about 2"
3. Remove the rear block
4. Dual cases (both with 2.28 for now)
5. 3rd row seat cause I have a family of 6 & everyone wants to go wheeling
6. Some sort of cage for the rear passengers
7. Extend the soft top to the rear when 3rd row seat gets installed
I think thats enough for now
I'll posts pic's when I figure it out.
Currently it has a Sky front hanger moved forward 1" & boomerang shackles with Alcan 5.5" springs that are 1.5" longer than stock, Marlin u-bolt flip kit, Sky x-over steering, Marlin 14" shock hoops Rancho 9000's in the front. The rear has 63" Chevy's with Chevy u-bolts as a u-bolt flip kit, a Chevy lowering shackle flipped as a lift shackle attached to a drop shackle, custom rear shock mounts with Rancho 9000's. I have a 2" block to level it out since the front was higher than expected. Front axle has a Quik Loc in the front w/open rear & 5.29 Yukon gears front & rear. 2" body lift to help clean Marlin sliders. Custom rear bumper with trailer hitch & D-rings. Square tube front d-line, 12,000lb Warn winch mounted in the front. Bikini top for the summer time & a cheesy thrown together hitch mounted spare tire carrier.Coming soon & not in order
1. Finish front winch mount bumper
2. Rears up front & lower the height by about 2"
3. Remove the rear block
4. Dual cases (both with 2.28 for now)
5. 3rd row seat cause I have a family of 6 & everyone wants to go wheeling
6. Some sort of cage for the rear passengers
7. Extend the soft top to the rear when 3rd row seat gets installed
I think thats enough for now
I'll posts pic's when I figure it out.

Tallchevy350- Grease Monkey

-

Number of posts: 156
Age: 39
Location: East Side of the Bay
Job/hobbies: Grease Monkey
Registration date: 2007-12-20
Re: 87 Runner
Let see if this works :scratch:
Built not bought spring hanger

Built not bought spring hanger

Last edited by on Fri Dec 21, 2007 3:51 am; edited 1 time in total

Tallchevy350- Grease Monkey

-

Number of posts: 156
Age: 39
Location: East Side of the Bay
Job/hobbies: Grease Monkey
Registration date: 2007-12-20
Re: 87 Runner
Got it :cheers:

Tallchevy350- Grease Monkey

-

Number of posts: 156
Age: 39
Location: East Side of the Bay
Job/hobbies: Grease Monkey
Registration date: 2007-12-20
Re: 87 Runner
These are some older pic's. I need to update.





















Tallchevy350- Grease Monkey

-

Number of posts: 156
Age: 39
Location: East Side of the Bay
Job/hobbies: Grease Monkey
Registration date: 2007-12-20
Re: 87 Runner
Yeah, don't you got that snazzy new tire carrier?
Nice shot of Tommy's
Nice shot of Tommy's


FFC- KING KONG

-

Number of posts: 1139
Age: 24
Location: Sacramento, CA
Job/hobbies: E-Comm support/Wheelin
Rig: '93 Amigo, blah blah blah, '01 Nissan DD
Registration date: 2007-12-20
Re: 87 Runner
FFC wrote:Yeah, don't you got that snazzy new tire carrier?
Nice shot of Tommy's
Carrier works good but it was a quick temp for MCR. I knew we didn't have room for the 35" spare & our camping gear


Tallchevy350- Grease Monkey

-

Number of posts: 156
Age: 39
Location: East Side of the Bay
Job/hobbies: Grease Monkey
Registration date: 2007-12-20
Re: 87 Runner
Tallchevy350 wrote:FFC wrote:Yeah, don't you got that snazzy new tire carrier?
Nice shot of Tommy's
Carrier works good but it was a quick temp for MCR. I knew we didn't have room for the 35" spare & our camping gear :no:
So you don't have it on anymore??

FFC- KING KONG

-

Number of posts: 1139
Age: 24
Location: Sacramento, CA
Job/hobbies: E-Comm support/Wheelin
Rig: '93 Amigo, blah blah blah, '01 Nissan DD
Registration date: 2007-12-20
Re: 87 Runner
Why, thank you...FFC wrote:
Nice shot of Tommy's
_________________
I h8 fords, therefore I am!

fordh8r- Gearhead Monkey

-

Number of posts: 329
Age: 40
Location: East Bay, Nor Cal
Job/hobbies: Mechanic, wheeling and riding in the dunes
Rig: Mostly stock stuff with a few minor changes.
Registration date: 2007-12-20
Re: 87 Runner
FFC wrote:Tallchevy350 wrote:FFC wrote:Yeah, don't you got that snazzy new tire carrier?
Nice shot of Tommy's
Carrier works good but it was a quick temp for MCR. I knew we didn't have room for the 35" spare & our camping gear :no:
So you don't have it on anymore??
I still have it.

Tallchevy350- Grease Monkey

-

Number of posts: 156
Age: 39
Location: East Side of the Bay
Job/hobbies: Grease Monkey
Registration date: 2007-12-20
Re: 87 Runner
I just noticed something in my pic's! I'm not in any of them 


Tallchevy350- Grease Monkey

-

Number of posts: 156
Age: 39
Location: East Side of the Bay
Job/hobbies: Grease Monkey
Registration date: 2007-12-20
Re: 87 Runner
Update:
I started changing the interior from blue to grey. No pic's of the upgrade yet cause I'm not done. I still have to change the dash pad.
Next I did RUF.


Here is the first set up. Axle was only 3/4" forward.

Here is the RUF set up. A noticable difference.

Poser shot

I still have to relocate the shock hoops & build bump stops.
I started changing the interior from blue to grey. No pic's of the upgrade yet cause I'm not done. I still have to change the dash pad.
Next I did RUF.


Here is the first set up. Axle was only 3/4" forward.

Here is the RUF set up. A noticable difference.

Poser shot

I still have to relocate the shock hoops & build bump stops.

Tallchevy350- Grease Monkey

-

Number of posts: 156
Age: 39
Location: East Side of the Bay
Job/hobbies: Grease Monkey
Registration date: 2007-12-20
Re: 87 Runner
I forgot, I traded the 12,000# winch I had for an 8000# with synthetic line, Now I can have a bumper built,

Tallchevy350- Grease Monkey

-

Number of posts: 156
Age: 39
Location: East Side of the Bay
Job/hobbies: Grease Monkey
Registration date: 2007-12-20
Re: 87 Runner
Runner is looking good! What is next?

Wermz- Grease Monkey

- Number of posts: 60
Age: 37
Location: Hippie Town
Job/hobbies: Networking Destructo-Geek/ wheeling, going fast.
Registration date: 2007-12-27
Re: 87 Runner
Thanks! I made some plates to weld to the frame before I install the shock hoops. I hope to get that installed tonight. I also have to install a steering stablizer cause of the death wobble. More to come but these will be first.

Tallchevy350- Grease Monkey

-

Number of posts: 156
Age: 39
Location: East Side of the Bay
Job/hobbies: Grease Monkey
Registration date: 2007-12-20
Re: 87 Runner
hey man is this the one your making the half doors on?
_________________
Thanks to all that helped on MCR

BIG BLING- KING KONG

-

Number of posts: 1634
Age: 33
Location: S SAC
Job/hobbies: AUTO RESEARCH TECH/ wheelin and building junk
Registration date: 2007-12-20
Page 1 of 2 • 1, 2 
Permissions of this forum:
You cannot reply to topics in this forum
Home
Calendar
Log in



