LOTS OF STUFF

10% off for anyone on this board that will pick up - MANY more parts to come

Complete D-MAX or any other chebby IFS front end.. I have everything ( PICS COMING )
- D60 IFS minus actuator, 3.73 open 250.00
- DS tie rod 30.00
- CV spacers 20.00
- idle arm, drag link etc, steering shock 100.00
- CV shafts ( 1 has small tear in boot, did it while pulling apart front end ) 100 a piece
- torsion bars 25.00 set
- stock UCA's 25.00 set
- bilstein shocks ( newer ) 125.00 set shipped
- 6" lift spindles 300.00 set
- misc lift parts ???
- wheel bearing hubs 150.00 piece ( 450.00 at stealership )

Front IFS Billstein 5100's like new
125.00 for the pair shipped


Ballistic FAB Double Shear D60 KP steering, NEW, complete and shipped 500.00 / trade
BRAND NEW, never ran, its been bolted up though..
- Selling because I ran into clearance issues.. I have over 700.00 into this set up.
- Set up to bolt right into a 79 HP F350 D60
What you get
- Double shear D60 KP arms
- new springs
- new gaskets
- 2 RH 7/8 heims
- 1 LH 7/8 heim
- 6 7/8 to 5/8 mis alignment spacers
- 1.5" OD .250 wall drag link with welded in tube adapters LH and RH ( 30 1/2" end to end, not including heims )
- 1.5" OD 0.250 wall tie rod with welded in tube adapters LH and RH ( 49 1/4" end to end , not including heims )
- 3) 5/8 grade 8 hardware
- 4) grade 8 allen heads for top of double shear

what you will need
- arp studs if you dont have them
- steering box tie rod or heim if full hydro

Like I said, its new, just bolted up...

500.00 Shipped anywhere in the lower 48.

4* steel axle shims
-20.00 Shipped

D60 stock Diff cover
- no dents
- 30.00 shipped

D60 HUBS SOLD SOLD SOLD
- cleaned and gegreased / ready to bolt in
- missing 1) allen
- 100 shipped
- 30 SPL

If you've still got the hubs in a week or so, I might take them off your hands after I get some bills paid.

Blackdog wrote:If you've still got the hubs in a week or so, I might take them off your hands after I get some bills paid.

I'll hold em for you

Let me know bro...

sweet deal. I'll have matt get them from you once I get some dough.

RJ, you got a paypal?

RJ, hey have you sold the steering arms?

I might need for the upcoming project. We can talk this weekend.

lil-bronc wrote:RJ, hey have you sold the steering arms?

I might need for the upcoming project. We can talk this weekend.

still got em

Blackdog wrote: sweet deal. I'll have matt get them from you once I get some dough.

u got money yet ?

Chopperman wrote:

Blackdog wrote: sweet deal. I'll have matt get them from you once I get some dough.

u got money yet ?

yeah. check your PMs, or the post right above lilbroncs

Blackdog wrote:

Chopperman wrote:

Blackdog wrote: sweet deal. I'll have matt get them from you once I get some dough.

u got money yet ?

yeah. check your PMs, or the post right above lilbroncs

pay pal me at jennfiechter@wavecable.com with an ady and i will send them out

Payment sent mang

Blackdog wrote:Payment sent mang

received..

parts will ship priority mail tomorrow

Chopperman wrote:

Blackdog wrote:Payment sent mang

received..

parts will ship priority mail tomorrow

Damn dude we coulda took them out this weekend