http://greasemonkey4x4.forumotion.com/builds-f8/-t1.htm Post your step by step build! Wed, 26 Aug 2009 00:01:43 GMT 10 http://i80.servimg.com/u/f80/11/80/72/07/banner10.jpg http://greasemonkey4x4.forumotion.com/builds-f8/-t1.htm http://greasemonkey4x4.forumotion.com/builds-f8/project-raider-x-t336.htm BIG BLING Im going to put all my pics and build here. Builds Mon, 10 Mar 2008 23:13:41 GMT http://greasemonkey4x4.forumotion.com/builds-f8/project-raider-x-t336.htm#2664 http://greasemonkey4x4.forumotion.com/builds-f8/project-raider-x-t336.htm http://greasemonkey4x4.forumotion.com/builds-f8/blackhawk-build-t748.htm no-idea Builds Fri, 24 Jul 2009 14:40:27 GMT http://greasemonkey4x4.forumotion.com/builds-f8/blackhawk-build-t748.htm#6379 http://greasemonkey4x4.forumotion.com/builds-f8/blackhawk-build-t748.htm http://greasemonkey4x4.forumotion.com/builds-f8/462-s-85-fo-runna-t486.htm fortysixandtwo This is my 1985 Toyota 4Runner build up thread. I bought this truck in January of 2005. I bought it from the second owner who had performed all the modifications through the help of a local shop. It was kept in a storage unit the last 10 years of its life, and even had the original paint job. When I bought it, it already had: -DOA built 22RE, bored, cams, downey header, k&n air filter w/ 20,000 miles on it when I bought it -Front and Rear custom bumpers -2 inch NWOR leaf springs -heavy ... Builds Thu, 15 May 2008 04:57:44 GMT http://greasemonkey4x4.forumotion.com/builds-f8/462-s-85-fo-runna-t486.htm#4079 http://greasemonkey4x4.forumotion.com/builds-f8/462-s-85-fo-runna-t486.htm http://greasemonkey4x4.forumotion.com/builds-f8/the-sammi-t763.htm tubebuggy figured i would start a thread for Becky's sammi well first i think it needs a nickname any ideas? i changed the crank pulley to speed up the toy p/s pump (low range off road $45) replaced the t case mount to a one piece cross member/skid plate base (low range off road $195) got a used clutch cable still needs to be installed replaced the glove box door (had a broken hinge) repaired some of the wiring under the dash gutted all the old a/c ducts from the dash pics coming soon Builds Wed, 26 Aug 2009 00:01:43 GMT http://greasemonkey4x4.forumotion.com/builds-f8/the-sammi-t763.htm#6636 http://greasemonkey4x4.forumotion.com/builds-f8/the-sammi-t763.htm http://greasemonkey4x4.forumotion.com/builds-f8/30-killer-t675.htm Blackdog Link to my build over on marlin. Yes, its taken a LONG TIME! http://board.marlincrawler.com/index.php?topic=23424.0 And of course, my most recent activity (done today) Removing the bed Tucked back inside the garage Temporary home for the bed Now that the bed is off, I'm going to mount my OBA tank, so its ready when I finally do it, remount my exhaust, redo my exhaust mounts, and raise my gas tank. Probably also pull it and mount the 60 ... Builds Thu, 29 Jan 2009 23:38:53 GMT http://greasemonkey4x4.forumotion.com/builds-f8/30-killer-t675.htm#5506 http://greasemonkey4x4.forumotion.com/builds-f8/30-killer-t675.htm http://greasemonkey4x4.forumotion.com/builds-f8/77-k5-t505.htm cdgvw1 Here are a few Pics of my hi-Steer/Crossover steering install so far. I need a shorter center link (getting that today) Builds Thu, 05 Jun 2008 21:10:24 GMT http://greasemonkey4x4.forumotion.com/builds-f8/77-k5-t505.htm#4254 http://greasemonkey4x4.forumotion.com/builds-f8/77-k5-t505.htm http://greasemonkey4x4.forumotion.com/builds-f8/buggy-build-up-t398.htm tubebuggy dont really have pics of the build step by step so heres random pics thought the never ending project Builds Thu, 10 Apr 2008 00:11:50 GMT http://greasemonkey4x4.forumotion.com/builds-f8/buggy-build-up-t398.htm#3338 http://greasemonkey4x4.forumotion.com/builds-f8/buggy-build-up-t398.htm http://greasemonkey4x4.forumotion.com/builds-f8/81-toyota-t612.htm Jay D Got my marlin mc07 and my topshift case. Also have a drop bar for front to fix pinion angle on front axle. I will post updates and pics as I go. Still need a front drive shaft to build a square out of. Builds Thu, 09 Oct 2008 02:44:32 GMT http://greasemonkey4x4.forumotion.com/builds-f8/81-toyota-t612.htm#5045 http://greasemonkey4x4.forumotion.com/builds-f8/81-toyota-t612.htm http://greasemonkey4x4.forumotion.com/builds-f8/93-migo-t754.htm FFC Well... I got an idea for pushing the front forward without extending the frame. Not very good pics, but it looks like this guy just used long/reinforced shackles. I would think I could do this and move the rear mount forward.... any thoughts on this? Here's what it looks like now, as you can see the front axle is pretty far back when compared to the red Migo. When the tire comes up it stuffs into the floorboard so bad the rig won't move: Here's what I'm thinking about accomplishing: ... Builds Wed, 05 Aug 2009 16:25:58 GMT http://greasemonkey4x4.forumotion.com/builds-f8/93-migo-t754.htm#6469 http://greasemonkey4x4.forumotion.com/builds-f8/93-migo-t754.htm http://greasemonkey4x4.forumotion.com/builds-f8/devil-dog-runner-wheelin-pics-t239.htm oldyellercj Well here is what I am starting with 87 4 RUNNER SR5 this is the front axle Im gonna use I have a few parts saved up so I can get to work soon and build buiild build Gonna have SAS, 2.28 front and 4.7 rear duals, marlin chrome molly axles, rears up front custom pack, and 63" custom pack Chevys in rear, hi steer, full cage, 35's w/bead locks, rock rails, some exo work, half doors and ... Builds Fri, 25 Jan 2008 19:14:56 GMT http://greasemonkey4x4.forumotion.com/builds-f8/devil-dog-runner-wheelin-pics-t239.htm#1680 http://greasemonkey4x4.forumotion.com/builds-f8/devil-dog-runner-wheelin-pics-t239.htm http://greasemonkey4x4.forumotion.com/builds-f8/our-new-87-sammi-t738.htm tubebuggy well i bought petes old sammi got a little froggy last night and did some work replaced the p/s pump with a pump from a toy 22r w/carb replumed the hyd hose res to orbital installed a amp and new 6x9 speaker cans up high in back replaced the whole exhaust 2 1/4 pipe and 2 1/4 flowmaster gutted the a/c from the dash rewired the lights added some more rock lights built a ice chest rack for the rear hitch started installing a cb in the a/c control opening oh and installed ... Builds Fri, 10 Jul 2009 04:10:58 GMT http://greasemonkey4x4.forumotion.com/builds-f8/our-new-87-sammi-t738.htm#6174 http://greasemonkey4x4.forumotion.com/builds-f8/our-new-87-sammi-t738.htm http://greasemonkey4x4.forumotion.com/builds-f8/project-cj-1-ton-t297.htm Just2Much19 I currently have a 1958 CJ-5 with a 12 bolt lincoln locked, and a 10 bolt up front open; both with 5.38:1 gears. It also has a Chevy 350 in it with an SM420, and Dana 300 t-case. I got a good deal on a 1974 Blazer on 1 tons; Dana 60 front with ARB and 4.56:1 gears, and rear is a 14 bolt full floater with detroit and 4.56:1 gears. I will be swapping axles and then also taking the winch and then attempting to sell the Blazer. Here is what I am starting with: Here is ... Builds Thu, 21 Feb 2008 17:36:42 GMT http://greasemonkey4x4.forumotion.com/builds-f8/project-cj-1-ton-t297.htm#2210 http://greasemonkey4x4.forumotion.com/builds-f8/project-cj-1-ton-t297.htm http://greasemonkey4x4.forumotion.com/builds-f8/2001-wj-jeep-grand-cherokee-limited-pics-now-t615.htm jman-mopar I finaly got a 4wd for camping and going to the snow. pics coming up soon probley monday. remember this build up is not a rock crawler... I just what a good 4wd for snowboarding and going camping at moonrocks. some plans for it are lift about 2in spacers. k and n filter kit borla cat back. radio upgrade. and that will be about it. Jman Builds Fri, 10 Oct 2008 06:35:44 GMT http://greasemonkey4x4.forumotion.com/builds-f8/2001-wj-jeep-grand-cherokee-limited-pics-now-t615.htm#5054 http://greasemonkey4x4.forumotion.com/builds-f8/2001-wj-jeep-grand-cherokee-limited-pics-now-t615.htm http://greasemonkey4x4.forumotion.com/builds-f8/tranny-swap-t637.htm tubebuggy clutch fork adjuster done


]]> Builds Thu, 30 Oct 2008 23:12:54 GMT http://greasemonkey4x4.forumotion.com/builds-f8/tranny-swap-t637.htm#5241 http://greasemonkey4x4.forumotion.com/builds-f8/tranny-swap-t637.htm http://greasemonkey4x4.forumotion.com/builds-f8/another-4runnerkeeping-it-stock-t284.htm Tallchevy350 The engine is apart & sitting in the back. The plan is to do an SAS using the parts from my current white 87 Runner. I'll post some pic's in the next few days of how it sits right now & of course as the build goes.]]> Builds Sun, 10 Feb 2008 03:12:26 GMT http://greasemonkey4x4.forumotion.com/builds-f8/another-4runnerkeeping-it-stock-t284.htm#2089 http://greasemonkey4x4.forumotion.com/builds-f8/another-4runnerkeeping-it-stock-t284.htm http://greasemonkey4x4.forumotion.com/builds-f8/3rd-gen-all-pupose-4runner-t290.htm cougarfreak Putting a D60 in the rear of my 4Runner. http://greasemonkey4x4.forumotion.com/yota-tech-f6/d60-rear-into-cougarfreak-t190.htm#2152 Complete build up here: http://www.cougarfreakphoto.com/index.php?ShowPage=4Runner Builds Thu, 14 Feb 2008 02:09:15 GMT http://greasemonkey4x4.forumotion.com/builds-f8/3rd-gen-all-pupose-4runner-t290.htm#2153 http://greasemonkey4x4.forumotion.com/builds-f8/3rd-gen-all-pupose-4runner-t290.htm http://greasemonkey4x4.forumotion.com/builds-f8/willynilly-involved-in-a-custody-battle-t305.htm skipnrocks Alright guys heres some pics of my build. Its been ongoing for a while. Most mods are apparent but feel free to ask questions! Started as a stock 1951 CJ3A till I striped the R&P blew the clutch, and brake master cylinder in a trip to the mountains with 5 buddies in it. So the mods started. Got a bit of a rust problems. My baby boy in this pic about 4 months after I started my build. And again a few weeks ago when I picked up my 42s. Builds Mon, 25 Feb 2008 01:59:51 GMT http://greasemonkey4x4.forumotion.com/builds-f8/willynilly-involved-in-a-custody-battle-t305.htm#2258 http://greasemonkey4x4.forumotion.com/builds-f8/willynilly-involved-in-a-custody-battle-t305.htm http://greasemonkey4x4.forumotion.com/builds-f8/work-weekend-april-5th-and-6th-t340.htm BIG BLING ill have the beers and the food who is in and when is good for youall Builds Wed, 12 Mar 2008 23:24:12 GMT http://greasemonkey4x4.forumotion.com/builds-f8/work-weekend-april-5th-and-6th-t340.htm#2699 http://greasemonkey4x4.forumotion.com/builds-f8/work-weekend-april-5th-and-6th-t340.htm http://greasemonkey4x4.forumotion.com/builds-f8/project-big-bling-for-now-t245.htm BIG BLING



]]> Builds Mon, 28 Jan 2008 22:57:26 GMT http://greasemonkey4x4.forumotion.com/builds-f8/project-big-bling-for-now-t245.htm#1729 http://greasemonkey4x4.forumotion.com/builds-f8/project-big-bling-for-now-t245.htm http://greasemonkey4x4.forumotion.com/builds-f8/moose-s-rig-build-t259.htm FFC Garrett, you're going to have to post the specs, but here's some pics and a little info I know... So he rolled the truck originally, this is what it was to begin with, and this is what it looked like afterwards: So everyone put their heads together and found him a new cab. So he's doing the swap from reg to ext cab, keepin the 22R for now, and still workin on it. Builds Fri, 01 Feb 2008 20:50:27 GMT http://greasemonkey4x4.forumotion.com/builds-f8/moose-s-rig-build-t259.htm#1867 http://greasemonkey4x4.forumotion.com/builds-f8/moose-s-rig-build-t259.htm http://greasemonkey4x4.forumotion.com/builds-f8/what-would-you-name-a-project-with-t244.htm BIG BLING ]]> Builds Mon, 28 Jan 2008 20:00:03 GMT http://greasemonkey4x4.forumotion.com/builds-f8/what-would-you-name-a-project-with-t244.htm#1725 http://greasemonkey4x4.forumotion.com/builds-f8/what-would-you-name-a-project-with-t244.htm http://greasemonkey4x4.forumotion.com/builds-f8/the-blinger-t50.htm BIG BLING I have now cut it up and caged some of it and have a d44 and a chrysler 9 1/4 for it ready for install. On this cage I have heard some heat about the galvy and it would b easy to just put a link but here goes.]]> Builds Fri, 21 Dec 2007 07:33:08 GMT http://greasemonkey4x4.forumotion.com/builds-f8/the-blinger-t50.htm#161 http://greasemonkey4x4.forumotion.com/builds-f8/the-blinger-t50.htm