Project RAIDER X

noice.. Excellent job guys..

hey I read your post and look at pritty pics sick springs
lots of hard work. I bet your still glad you got your toyota and not the orgnail jeepers cripers unibody. when you weld up that rear frame mount to spring.. wow you really got to get some sliders for you doors now you going all out. and still no cage. or sliders.

I know its only time before their on but just what to save what is left of a soild cab. before you end up like a turtul on his back. just thinking of your own saftey. and passengers.



c u later

JERM did you see the pics of your niece driving the truck?

This weekend we should be putting the axle more forward and putting on new shock mounts and new shocks. The rear shocks will also be on and the whole rig will have a longer wheelbase. I normally do a shake down run before a huge get together, but Mcr will be my shakedown run for the new suspension and wheelbase set up.

I brought the truck over to choppermans house and we got some major work done on it. He welded up the shock mounts and I changed the alternator. We both tackled the motor mounts, that fell out when we lifted the motor. We got the tow rig fixed that broke down on the way to his house. got the d max 60 in and the steering on. We stayed up till 4 am on sunday morning and woke up at 8 something am and got back to working. Chopperman figured out why the t case was leaking and he built me a driveline too.

New mcr list.

Fix the t case leak (put bolts in that are missing, and index the rear output shaft nut)
Fix the front driveline
lights
fix wiring

Noice.. Ready to get your wheel on??

Took her on a shake down run it had great flex. everything is dialed in. I still have a noise in the front end that I hope to find before mcr, but the rest is great.

Looked good to me!

Just2Much19 wrote:Looked good to me!

dude ur rig is looking crazy cool man good job

ok so got the front end noise figured out. The d line was loose and the u bolt springs were loose. Still took the tires off and checked the spacers. also took of the bump stops and looked at the center pin and all good. tighten everything up, took off the fenders so i do not hit the tires under flex and the rock lights will show since they would not b4 with the fenders crunched in. FFC will do the rock lights tomorrow, Ill clean up the wiring for the arb, and load the new tool bags we got for the truck and we are good to go. I will not have the truss on for this trip (ran out of time). The new shock mounts are not in yet either because the rear springs are not on the front yet.

Oh, I tested that massive horn that has been under the truck for ages - and IT WORKS!!! HAHAHAHHAHAHAHAAAA. BEWARE! I will be hooking this up if I can find a spare switch... muuhahahahahahahaaa

TRUCK IS DONE LETS GO!!!