Project CJ 1 Ton

77k5 wrote:Are you selling the winch, lift, exhaust, doors, interior, Top? How much? Or how much for the rest of the truck, and what is left?

Not much is left. My buddy is taking the windshield frame to convert his into a convertible and the title. He is also taking the lift. I have the front bumper, tailgate without glass, front and rear seats, roll cage, winch, fenders, Lt wheel well, grill, hood, h4 hella head lights, NP203, TH350, radiator and steering column. I also have a bunch of odds and ends left in the truck. Let me know if you need anything from it before we junk the rest.

I have a brand new aluminum 1" body lift, and also brand new F250 mounts.

Here are some pics of the progress after today:

Also got a battery tray, psc steering setup with crossover, ORD steering brace, and a few more things I cant think of right now.

Hi, I am interested in the following items:

Steering box brace
PSC Setup - (what all is included)
winch (also what model)
F&R Seats
center console
roll bar
doors - (unless your buddy is taking them)
Engine?
front radiator core support
Does your buddy have a lift on his truck that he wants to sell? Year and lift size?
fuel tank with straps.
brake lines if your not keeping them
i think this is all i need right now..

let me know, thanks

Chris

Chris, give me a call. 516-903-7071

Steering box brace
PSC Setup - (what all is included) I will let you know for sure if I am selling this right away
winch (also what model) This is an old school Warn 8403. There is no controller but there is a switch hooked up to it. It works as I just tested it.
F&R Seats
center console
roll bar
doors - (unless your buddy is taking them) He is holding onto them for now just to measure his doors up to before cutting his own but they have a rust spot on the bottom. If you still want them I will get them for you. Unless you just need the glass or something thats easy.
Engine? 3470010 is the casting number. I am not positive about selling that yet
front radiator core support
Does your buddy have a lift on his truck that he wants to sell? Year and lift size? I will let you know about this
fuel tank with straps. Do you want the skid plate too?
brake lines if your not keeping them I will let you know about these once I complete the axle swap onto my jeep.

Unless noted everything else I will sell to you. I will try and work up some prices today. I am just going to see what they are selling for on ebay and other sites and then discount it some from there. If you have a price in your head let me know.

I also have a winch front bumper.

Yeah, it is the older model of the 8274 warn winch. I have seen the 8274 go anywhere from 100 to 400. I don't have a price yet but I can figure out one. Also, are the exhaust pipes available. I don't need the mufflers, but i do need pre-bent exhaust pipe from that truck.. if your selling that too.

Sorry the exhaust is sold. Yea, I would say about $140 for the winch with the fairlead and hook.

Cool. I like the price on the winch.

So for now give me a total on these parts:

Winch
steering brace
doors
seats and console
rollbar

thanks,Chris

77k5 wrote:Cool. I like the price on the winch.

So for now give me a total on these parts:

Winch
steering brace
doors
seats and console
rollbar

thanks,Chris

PM sent

This is where we are at after tonight. We got the tranny and t-case out, along with a bunch of other little stuff. Tomorrow comes the engine and axles.

Just2Much19 wrote:Chris, give me a call. 516-903-7071
.

Dude this will be on every bathroom wall from here to Sac.

easy!!!

Here is the progress after tonight. Now I need to sell some of the stuff I got off of it that is taking up space in my garage and then rip out my axles.

I am going to go to PC this Sunday, then drop the jeep off to get the clutch done on Monday and once I get it back I will be working on swapping out the axles.

New plans! The jeep is going to Sillyfab on Thursday to get the clutch done, axles put in and drivelines made.

Hopefully I will be oficially 1-ton in under 2 weeks.

I was going to swap the axles myself but since I tore down the Jimmy my garage is packed with parts!

The 1 tons are in!!! I need to dump those 37's! I will soon be going with 42's with beadlocks. Also during all of this the Dana 20 was yanked and replaced with a Dana 300 with an AA adapter. The clutch looks good but the hydraulics might be messed up, we are just going to replace them.

I just need a D44 yoke and also a CV yoke for the Dana 300.